24V DC PWM 0~10V Speed Control Cross Flow Fan for HVAC Floor Unders Warmth

• Customization: Available
• Material: Aluminum
• Usage: for Air Conditioner, for Manufacture
• Model NO.: PC3N30B24S
• Flow Direction: Cross Flow
• Pressure: Low Pressure
• Certification: RoHS, ISO, CE, UL
• Rated Speed: 2650rpm
• Rated Voltage: 24V
• Rated Power: 2.4W
• Air Flow: 182m³/H
• Air Pressure: 24PA
• Sound Level: 39dB(a)
• Transport Package: Standard Exporting Package
• Specification: BE37.5DC
• Trademark: PBM
• Origin: China
• HS Code: 8414519900
• Production Capacity: 50, 000PCS/Year
• Package Size: 42.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 3.000kg

Product Description

Product Description

Slim Installation Height and High Air Flow Rate with lowest Noise

PBM tangential blowers combine 30~80mm diameter cross flow impeller with one single piece length maximum to 65mm, with AC and DC power supply EC green technology motor, with aluminum die cast fan frame, with anti-vibration rubber damping pad system, with ball bearing and sleeve bearing, maximum entire tangential fan length goes up to 1190mm at single, double and triple sections harmoniously connected together makes it possible to achieve a very high airflow throughput ratio with extremely low wind noise with quiet three-core sin-wave integrated commutation electronics motor controller circuit and low air flow velocity. Cross flow blowers are available for home indoor stove, fireplace, oven, wood burner underfloor convectors, air doors, air curtains, air conditioners and heaters' cooling and ventilation at extremely shallow, flat design to satisfy home appliances' nice outlooking and slim features that market requirements and consumer calling for.
 
Low noise with high air flow rates and low back pressures, compact slim design with anti-vibration rubber mechanical soft connection system, moisture proof and water proof versions are available for entire range tangential blowers with integrated and intelligence EC technology motor with PWM signal and 0~10V analog voltage to adjust power, and ErP2015 (Energy-related Products) directive conformity.
 

Impeller Sizes:  from 30mm to 80mm diameter;

Sound Level:  from 32dBA to maximum 48dBA according different rotation speed;

Airflow:  maximum to 600CMH, Cubic Meter per Hour, equal to approx. 353CFM , Cubic Feet per Minute;

Air Pressure:  Maxim to 80Pa, equal to 8.16mm H2O and to 0.32 inches H2O;

Power:  Maximum motor input power goes to 100W motor diameter 80mm.
 

Product Parameters

General Characters:

1-1	Rated Voltage	24 VDC
1-2	Operating Voltage	16~28 VDC
1-3	Low-Start Voltage	15 VDC
1-4	Rated Speed	2650RPM
1-5	Input Current	0.10A
1-6	Input Power	2.4W
1-7	Acoustical Noise	39dB(A)
1-8	Life Expectance	50,000Hours(L10) At 40ºC room, humidity 15%~65%RH
1-9	Direction of Rotation	Anti-clockwise see on motor
1-10	Direction of Air Flow	All round
1-11	Insulation Class	Class B
1-12	Insulation Resistance	50Mega Ohm minimum at 500VDC Between frame and (+) terminal
1-13	Motor Protection	Locked rotor protection Polarity protection Automatic restart capability
1-14	Speed Control	Control input 0~10VDC
1-15	Dielectric Strength	5mA maximum at 500VAC 50Hz five second Between frame and (+) terminal
1-16	Signal Output	No

Mechanical Characters:

2-1	Dimension	48mm X 50mm X 356mm (see dimension drawing)
2-2	Material of Impeller	Steel
2-3	Number of Blades	22
2-4	Impeller Plate	Injection-moulded round sheet-metal plate
2-5	Mounting position	Any
2-6	Surface of Rotor	Electrophoresis
2-7	Bearing System	NMB ball bearing
2-8	Lead Wire	Red , Black, White AWG22#
2-9	Weight	466g
2-10	Package	Standard

Electrical Protection:

3-1	Locked-rotor Protection	Over-current limiting circuit protects motor from damage at least for 72 hours of locked rotor condition at rated voltage.
3-2	Maximum Current under Locked Rotor	A, Typical inrush current when the motor is trying to re-start under locked rotor conditions is 2~4 times the normal running current reoccurring and for 16~20% of restarting cycle period. B, If he CL function is used this restarting inrush current is about the same as the normal running current.
3-3	Reverse Polarity Protection	No damage if the positive and negative leads are reversed under maximum operation voltage conditions.
3-4	Over Voltage Protection	The circuit will be shut down automatically when input voltage over 30VDC. And re-started when Voltage down to 30VDC below.
3-5	Soft Start	In 5 seconds after power on and speed control voltage gets to 1.5V.

Enviromental Characters:

4-1	Operating Temperature	-25ºC to 60ºC
4-2	Storage Temperature	-40ºC to 75ºC
4-3	Operating Humidity	5% to 90% RH
4-4	Storage Humidity	5% to 95% RH
4-5	Drop Test	In minimum packaging condition fan withstand each one drop of three faces from 30cm distance height onto 10mm thickness of wooden board
4-6	Vibration Test	Sine Wave. Displacement amplitude: 0.75mm (Equivalent 10G). Frequency Range: 10Hz~55Hz / 30 sec. 55Hz~10Hz / 30 sec Linear Scanning 120 Cycle Endurance timer per axis: 2 Hours Orientation: X,Y,Z.
4-7	Shock Test	Apply peak acceleration 50g and keep duration of the pulses for 11ms (Half sine wave).
4-8		All the material meets RoHS standard.

Detailed Photos

Company Profile

PBM DC Tangential Blowers with Different Motor Sizes
                             
Application: Air Conditioners, Air Curtain Equipment,        Application: Heat Pump, Hybrid Systems, Air Doors,       Application: Refrigeration and Display Cabinets,
Heater, Dryers, Laser Instruments, Home Appliances,     Electrical Heating, Fireplace, Electric Corner Heater,       Air Conditioning Fans (Air Conditioning Fans, Building Fans,
Floor Convector, Trench Heater, Rooms, Public Places,  Heat Recovery, Storage Heaters,Underfloor Convectors Tower fans), Air Heaters, Electric Fireplaces, Air Curtain
Vehicles, Underfloor Convectors, Air Doors.                     Stove Jacket Cooling,                                                       Machines, Embedded Ovens, Wood-burning Stoves,
                                                                                                                                                                                    Air Conditioners and Storage Heaters etc.                                      
PBM DC Tangential Blowers with X1/X2/X3 Machine Type
                  

FAQ