Hot Selling Cooling and Heat Dissipation Box Gas Fireplace Thermostats Cross Flow Fan Motor

• Customization: Available
• Material: Aluminum
• Usage: for Manufacture
• Model NO.: PC30B1298B
• Flow Direction: Cross Flow
• Pressure: Low Pressure
• Certification: RoHS, CE, UL
• Rated Speed: 3000 Rpm
• Rated Voltage: 12 VDC
• Input Current: 0.10 a
• Input Power: 1.2 W
• Acoustical Noise: 29 dB(a)
• Air Flow: 20.60cfm
• Transport Package: Standard Exporting Package
• Specification: DC Motor
• Trademark: PBM
• Origin: China
• HS Code: 8414519900
• Production Capacity: 50, 000PCS/Year
• Package Size: 24.00cm * 24.00cm * 24.00cm
• Package Gross Weight: 3.000kg

Product Description

Product Description

Hot Selling Cooling And Heat Dissipation Box Gas Fireplace Thermostats Cross Flow Fan Motor
Model:PC30B1298B

combine 30~80mm diameter cross flow impeller with one single piece length maximum to 65mm, with AC and DC power supply EC green technology motor, with aluminum die cast fan frame, with anti-vibration rubber damping pad system, with ball bearing and sleeve bearing, maximum entire tangential fan length goes up to 1190mm at single, double and triple sections harmoniously connected together makes it possible to achieve a very high airflow throughput ratio with extremely low wind noise with quiet three-core sin-wave integrated commutation electronics motor controller circuit and low air flow velocity. Cross flow blowers are available for home indoor stove, fireplace, oven, wood burner underfloor convectors, air doors, air curtains, air conditioners and heaters' cooling and ventilation at extremely shallow, flat design to satisfy home appliances' nice outlooking and slim features that market requirements and consumer calling for.
 
Low noise with high air flow rates and low back pressures, compact slim design with anti-vibration rubber mechanical soft connection system, moisture proof and water proof versions are available for entire range tangential blowers with integrated and intelligence EC technology motor with PWM signal and 0~10V analog voltage to adjust power, and ErP2015 (Energy-related Products) directive conformity.
 

Impeller Sizes:  from 30mm to 80mm diameter;

Sound Level:  from 32dBA to maximum 48dBA according different rotation speed;

Airflow:  maximum to 600CMH, Cubic Meter per Hour, equal to approx. 353CFM , Cubic Feet per Minute;

Air Pressure:  Maxim to 80Pa, equal to 8.16mm H2O and to 0.32 inches H2O;

Power:  Maximum motor input power goes to 100W motor diameter 80mm.
 

Product Parameters

General Characters:

Rated Voltage	12 VDC	Insulation Class	Class B
Operating Voltage	9~15 VDC	Insulation Resistance	50 Mega Ohm minimum at 500VDC Between frame and (+) terminal
Rated Speed	3000 RPM	Motor Protection	Locked rotor protection Polarity protection Automatic restart capability
Input Current	0.10 A	Speed Control	Control input 0~10VDC
Input Power	1.2 W	Dielectric Strength	5mA maximum at 500VAC 50Hz five second Between frame and (+) terminal
Acoustical Noise	29 dB(A)	Air Flow	20.60 CFM / 35 m^3/H
Life Expectance	50,000Hours(L10) At 40ºC room, humidity 15%~65%RH.	Static Pressure	1.73 mmH2O / 17 Pa
Direction of Rotation	Clockwise seen on motor	Protection Type	IP44

 

Environmental Characters:

Dimension	48 x 50 x 152(see dimension drawing)	Bearing System	NMB ball bearing
Material of Impeller	Aluminum alloy	Lead Wire	Red , Black, White AWG22#
Number of Blades	22	Package	Standard

 

Electrical Protection:

Locked-rotor Protection	Over-current limiting circuit protects motor from damage at least for 72 hours of locked rotor condition at rated voltage.	Soft Start	In 5 seconds after power on and speed control voltage gets to 1.5V.
Reverse Polarity Protection	No damage if the positive and negative leads are reversed under maximum operation voltage conditions.	Over Voltage Protection	The circuit will be shut down automatically when input voltage over 15VDC. And re-started when Voltage down to 15VDC below.

Environmental Characters:

Operating Temperature	-25ºC to 60ºC	Storage Humidity	5% to 95% RH
Storage Temperature	-40ºC to 75ºC	Operating Humidity	5% to 90% RH

Performance Curve:
 

Testing Condition
Input Voltage----Operating voltage (12 VDC)
Temperature-----Room temperature
Humidity---------65%RH
Test distance-----1m

Outline Drawing:

Note
1. Connection line 3X (Red, Black, White AWG22#);
Red=+12VDC, White=0-10VDC, Blue=GND.

Recommend Products

Products of the same series

Model Part No.	Rated Voltage VDC	Air Flow M^3/H	Air Pressure Pa	Rated Speed RPM	Sound Level dB(A)	Total Length mm
	12	35	17	3000	29	152
	24	35	17	3000	29	152
	12	42	15	2800	30	214
	24	42	15	2800	30	214
	12	52	14	2700	31	252
	24	52	14	2700	31	252
	12	65	14	2600	32	302
	24	65	14	2600	32	302
	12	72	13	2500	33	354
	24	72	13	2500	33	354
	12	84	12	2400	35	406
	24	84	13	2400	35	406

Company Profile

Certifications

Packaging & Shipping

FAQ

Q:How about the delivery time ?
A:Within 25 days after we receive the order.

Q:What kind of payments do you support?
A:T/T & L/C, other types please contact us.

Q: What's the MOQ?
A: Generally speaking, the MOQ is 100 pieces. Different products have different MOQ. Please contact us.

Q: Transportation?
A: All available shipping ways could be applied, by courier, air or sea. Appointed shipping company or our own forwarders all could be used in shipment Full-way tracking the cargos for you before the goods arrive.